Graphene Coat Nano Ceramic Full Protection for your car, full coat, 50 ml
0
400
400
Graphene Nano Ceramic Coating full protection for your car from K2 50ml complete protection for car paint from (tree tar and air conditioners. bird droppings. rain deposits. road residues. scratches and abrasions. environmental damages), self-cleaning for car paint as it forms large water balls that flow quickly off the car surface without damaging it.
Features of Graphene Nano Ceramic Coating:
Always maintain the appearance and shine of the car with a bright gloss.
Does not require washing the car with shampoo unless the shampoo is nano-specific to preserve the layer.
A nano technician should review for maintenance to ensure durability of quality and technology.
Used by nano ceramic application technicians and experts.
5-year warranty.
Tips before applying Graphene Coating:
The surface temperature should be between 10-35 degrees Celsius.
Place the car in a shaded area.
Do not apply the product in high humidity conditions.
Prepare the car surface or paint.
Clean and completely dry the paint.
The paint surface must be free of tar, dirt, waxes, oils, and the original factory protection.
Use CLAY BAR to remove any remaining dirt from the fine elements of the paintwork.
Polish paint defects and scratches, for example using a polishing machine and polishing pastes like K2 LUSTER.
Method of applying Graphene Protection from K2:
Before fully applying the ceramic, remove grease and dirt using a degreaser with the American product chemical Gays Wax Remover and Cleaner before nano from.
Shake the bottle well, put 6-8 drops on a dry, damp cloth that covers the dish.
Apply the nano with a cross movement on a surface no larger than 50×50 cm at a time.
Leave it on the paint for 1-2 minutes at 20 degrees Celsius, then polish the surface with a microfiber cloth (high temperature will shorten drying time, and low temperature will increase it).
Do not let the protection dry on the paint.
After finishing the first layer, wait at least an hour, then apply the next layer (for maximum hardness, it is recommended to apply 3 layers).
