Turtle Wax Scratch Repair & Renew Scratch Remover

Repair & Renew repairs light and heavy scratches in the restored paint for a brilliant shine.

We have heard from car owners time and time again why they love this product so much.

Made from self-aligning micro-sheets, the compound aggressively attacks scratches but is safe for all paints and clear coats, making it an incredibly easy and effective way to remove scratches on car surfaces.

To help protect this restored paint, the formula includes Heat & Seal thermal sealing technology, which prevents leakage and acts as a long-lasting protector.

A 2-in-1 procedure. Once you've finished repairing your car's paint scratches, there's no need to apply car wax to the treated area. It's already done!

Turtle Wax Repair & Renew Scratch Remover is an innovative new formula featuring our proprietary Hill & Seal Technology, with lasting results that won't fade when you wash your car next time. It contains micro-blotches that safely remove scratches, paint smudges, water spots, and more, leaving behind a brilliant shine. It can be applied manually with a microfiber towel or machine. Simply apply a small amount to the towel or hood, then leave the product on the stain for 30 seconds. Repeat until the desired results are achieved.

How to use:

Manual application:

Step 1:

Wash and dry the car. While it's drying, inspect the car for areas with scratches or other damage.

Step 2:

Gently run your fingernail over any scratch that seems fairly deep. If the scratch catches on your nails, please note that it may be too deep to repair.

Step 3:

Place a coin-sized amount of scratch remover onto a microfiber towel or polishing pad and work it into the car in a circular motion over the scratch and scuff. There's no need to press hard; the polishing particles will do the work for you.

Step 4:

Wipe the product clean and check your work. If the scratch is gone, you're finished! If it's still visible, simply repeat the steps. In either case, the area will be protected with a chemical seal and will have a beautiful shine.

Machine application

Use an 8mm dual-action flexible sealant with a 5.5-inch pad to apply this product. Add four drops of Repair & Renew Scratch Remover to your cutting board and apply the sealant on a low setting to smooth evenly over the desired surfaces. Gradually increase the low RPM as you work your way up and down the outer panels to erase and correct scratches and swirls.